My channel is no longer working; there is no picture on a channel; it says no signal Most likely the channel's transponder frequency has changed: a. Go to and type in your channel's name and press Enter. Locate the correct satellite c. Note down the Transponder frequency.
Using the Technomate 5402 M3 for receiving Intelsat 907 Hi guys, As I live on the Costa del Sol during the winter months I rely on the satback services on Intelsat 907 for my UK freeview services.
This is a 5 digit number that will normally begin with 10xyz, 11xyz or 12xyz. Note down the Polarisation. This is either H or V. Note down the Symbol Rate.
This is another 5 digit number. Go to your satellite receiver and press the Main Menu button on the remote. Go to Installation > Advanced Search h. Press the green button and enter the details accordingly from c, d and e as above. If the above didn't work, please try the following: a.
Press the Main Menu button on the remote b. Go to Installation > Satellite Setup c. Check that the LNB Type is Universal and that the LNB Frequency is 9.750/10.600 If the above didn't work, please contact our Technical Support Team. The message LNBF is displayed on the front of the satellite receiver. This means that there is an LNB short circuit.
Usually this means that water has somehow entered the cable from your dish (this could be from anything such as an animal biting the cable, incorrect tape used to cover the connections.) or that the cable connectors haven't been correct assembled. In order for the product to protect itself from damage, the short circuit protection has been initiated. Please contact our Technical Support Team for further advice.
0 kommentar(er)
